Flexible Endoscope Reprocessor
Flexible Endoscope Reprocessor

>Unique features
- User recognition and traceability
- Recognition of the single instrument through bar code
reading
system or
RIFD (Radio Frequency Identification)
-
Leak test at the beginning of the cycle with automatic
cycle
stop
in case of abnormalities
- The Flexible Endoscope Reprocessor as an all channel status
check with
identification, for each single channel, of obstruction
or disconnection,
during the whole cycle.
-
The EW2 Reprocessor has a low temperature disinfection cycle
execution, 35°C [95°] max
- The Steelco EW2 endoscope reprocesor traces all process
relevant cycle parameters
- The Steelco endoscope reprocessor completes a full
disinfection cycle in less than
20 minutes
-
It has an instrument self learning process
-
The Flexible Endoscope Reprocessor has an air break system
- The Steelco EW 2 reps up to 2 flexible endoscopes capacity
- 15883-1 -4 fully complying
-
Individual pressure channel control system
- Self cleaning and sanitation
- High level air filtering
- Double door version available
- Remote control assistance
- Patented system for a complete disinfection of the external
surface of the
endoscopes


-Channel connections
Color coded connections for an easy identification of each single channel
cart/ Washing machine coupling system
>
Steelco Patented rotating
cart for flexible endoscopes has been developed for easy operation also in
restricted spaces.
The rotation of the cart assured a frontal insertion of oth
instruments making the connection of the of the washing channels easy.
EW 2 Endoscope Reprocessor
ED100-ED 200 Endoscopes drying & Storage cabinets
For the safe and aseptic storage of flexible endoscopes
>Physical characteristics
- 8 endoscope capacity, stored into storage
cassettes
23.6" width x 23.6" depth
- Storage cassettes provided with water drain valve
for wet endoscopes.
- Glass lockable doors are reversible and therefore be
configured right or left opening also during
installation.
- Single and double door (pass through) versions.
After being reprocessed in EW 2, the endoscope is ready to be stored in our
ED100 or ED200 drying cabinets which protect endoscopes from any
recontamination.
Endoscopes are quickly dried inside and outside: warm
sterile air is blown through each internal channel and over all surfaces of
flexible endoscope while they are into the cabinet, ensuring that endoscopes
are will ventilated at all times.
The endoscope internal channels are connected to the drying circuit through
specific quick connectors. Up to 8 endoscopes stored into cassettes are
taken up at a time.
The process allows the storage of endoscopes that are ready for use at least
72 hours after full washing, reprocessing and storage with no need to
reprocess them again within this period. ED cabinets control the microbial
levels of the stored endoscopes which are then immediately ready to be used
whether for routine or emergency operations.
Steelco drying cabinets can e fitted with a bar code reader scopes in
and out ensuring full tracking and traceability of the scopes.
> Two models are available, both of
them are single or double door pass-through version:
- ED100 basic unit with keypad and LCD display
- ED200 PLC control with touch screen. The ED 200 version in endowed with
Ethernet connection through which it communicates to the Steelcodata for a
full traceability.
IMPORTANT NOTE!!!
The Steelco Endoscope reprocessor EW2 is a washer, high-level disinfector
for the reprocessing of flexile endoscopes according to the international
standards ISO 15883-1 and 15332-4. The Steelco EW2 does not have the US-FDA
pre-market notification registration 510(k) at this moment in time. Steelco
is working to obtain the registration in the very near future. Any
references to "disinfect" or meanings of it, used in brochures for the USA
market are inappropriate and improper. Steelco disclaims any liability in
connection with any representation that the Steelco EW2 acts as a
disinfector.
Devoted to Hygiene
News
Flexible Endoscopes
Steelco-USA inc. 999 Stinson Way Unit 301 West Palm Beach ,FL 33411 Phone:
561-791-8313 Fax: 561-791-8213
www.steelco-uas.com contact@steelco-usa .com
MC DESIGN